Backyard Buddy is always working on new ideas to make your lift more useful around the shop. Our new track and crane system makes pulling engines, removing and installing car bodies and loading/unloading heavy loads a lot easier. Click for more details.
Gives you the ability to move the lift with or without a vehicle in place.
Comes in set of 4 with heavy duty rubber wheels (some cheap lifts use steel wheels that can mark up your garage floor).
Two ton capacity. Collapsed height is 5.75" and fully extended at 13.75"
UPS shipping charges extra.
This one of a kind jacking platform is powered by the same hydraulic pump as the lift. Raise the tires off the deck for brake & suspension work. The jack folds flush when not in use and rolls to any position along the runways. Now you can work like the pros from your home!
Instead of a push button on the power unit, there will be a keyed lock switch. This locks the power unit so unauthorized person or children cannot operate without a key. This is available for 110 Volt power unit only.
A convenient way to store your Backyard Buddy lift casters when not in use.
Backyard Buddy oversized drip pans are manufactured of rugged galvanized steel and won't blow out on a windy day if your doors are open. They resist rust and most chemicals and will give many years of trouble free service. Sold as a set of four to protect the car stored below.
The standard power unit is 110 volt. This 220 volt power unit with 2 H. P. motor is recommended for commercial use or high-use enthusiast. Lifting time is faster at about 45 seconds.
If you don't have room for one of our lifts, Backyard Buddy's Easy-Access is a great alternative. These are more stable and safer than jack stands and can be configured for just about any application. Adjustable arms and pads can be used on axles, frames and unit-bodied cars, Car can be rolled around the shop on Easy-Access too. Made in the USA. Click for more info on Easy-Access.
Adds 12" to the length of the deck. Perfect for longer cars or trucks. Uses the existing wheel stops.
Rolls along the length of the lift and supports any kind of jack. Allows vehicle to be raised off the platform to remove tires for rotation of wheels, brake jobs, suspension work etc. Jack not included. (scissors, hydraulic, bottle, etc.)
This is the recessed version of our rolling jack platform which has more clearance for the jack on low to the ground cars. Does not use rollers to allow the platform to ride lower. For use with a bottle jack only (jack not included).
This 3 piece steel platform lies between the run ways to create a solid platform. Now you can store everything from ATV's & Snowmobiles to common lawn mowers and miscellaneous equipment.
Set of (2) wheel chocks adds security whenever working on your car or for long term storage.
Strong, lightweight composite ramps weigh only 4.5 pounds each.